# changelog

author: - yheneaul (at) matrox.com
date: 1236376800
changelog:
  - Fixed a bug in PLL programming sequence for G200eW/G200eV where a register IO
    offset was used  instead of a memory offset.
  - Removed clock selection toggling in PLL programming sequence for G200eW.
  - Fixed ddc1 protocol to support correct I/O lines according to chip attribute.
  - Fixed a bug in CRTC2 programming seqence where a register IO offset was used 
    instead of a memory offset.


author: - yheneaul (at) matrox.com
date: 1229119200
changelog:
  - bumped mga version to 1.4.9 in configure file to match xorg.
  - modified pll algorithm to fix pll stability for G200eW.


author: - yheneaul (at) matrox.com
date: 1227132000
changelog:
  - Added a workaround (blit 1x1 with rop=xor) to "fix" the black screen problem.
  - Removed "Winbond" from identification string for G200eW (just kept "Nuvoton")


author: - yheneaul (at) matrox.com
date: 1226008800
changelog:
  - Added Nuvoton to chip identification string for eW.
  - Blocked double scan modes for eW to prevent chip blocking.
  - Fixed pll m,n,p selection for eW to respect byte granularity.


author: - yheneaul (at) matrox.com
date: 1224021600
changelog:
  - "G200 WB" --> "G200 eW" due to marketing reasons.
  - Increased memory bandwith check to 318.77Mhz to allow mode like 1280x1024x32@60Hz to pass.
  - Added (eW and EV) suffix to g200 identifier string".
  - Changed default monitor setting range (hsync=31-80kHz and vsync=60Hz).
  - Added a check to detect mga chipset presence before modifying X config.


author: Roxanne Beem <Roxanne.Beem@lsi.com>
date: 1231891200
changelog:
  - Changed Update 5 to Update 7
  - then (under that) changed kernel_name from 2.6.9-55.EL to 2.6.9-78.EL


author: Eric Moore <Eric.Moore@lsi.com>
date: 1135123200
changelog:
  - removed 2.6.11 kernel ( for SuSE 9.3 Pro )
  - Added SuSE SLES9 SP3 - kernel = 2.6.5-7.244
  - new dkms.conf 
  - fusion.mptctl split into rh/suse - so it runs at S01


author: Eric Moore <Eric.Moore@lsi.com>
date: 1130284800
changelog:
  - Added /etc/init.d/fusion.mptctl, to autoload (ctl) driver
  - Added RedHat SP2 - kernel = 2.6.9-22.EL
  - Merged RedHat and SuSE into the same RPM (2nd take)


author: Eric Moore <Eric.Moore@lsi.com>
date: 1121817600
changelog:
  - Seperated RedHat and SuSE RPM
  - Added SuSE SLES9 SP2 - kernel = 2.6.5-7.191
  - Released for mptlinux 3.02.54 driver


